|
Aidmer78-011 Extruded PTFE Rod
Extrusion Teflon Rod: Dia.5mm ~ 200mm; Lenght: 300mm/pc ~ 5000mm/pc. Extruded PTFE Rod has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Extrusion Teflon rod has the lowest coefficient of friction of all known solid materials.
Aidmer78-012 Molded PTFE Rod
Molded Teflon Rod Dia.20mm ~ 400mm; Lenght: 100mm/pc ~ 300mm/pc. has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly sticks. Molded
PTFE rod has the lowest coefficient of friction of all known solid materials.
Aidmer78-021 Skived PTFE Sheet
Skived Teflon sheet: Thickness: 0.1mm ~ 6.0mm ; Skived PTFE Sheet is manufactured by molding with PTFE granular resin, corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide
Aidmer76-022 Molded PTFE Sheet
Molded Teflon sheet: Thickness: 3.0mm ~ 100mm ; Molded PTFE Sheet is manufactured by molding with PTFE granular resin, corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide
Aidmer78-031 Extruded PTFE Tubing
Extrusion Teflon Tubing: OD: 25mm ~ 410mm; Lenght: 100mm/pc ~ 4200mm/pc ;
Extruded PTFE Tubing is made by extrusion of suspension polymerized PTFE resin. Among all the existing plastics, Extrusion PTFE has the best corrosion-resistance and dielectricity. Lead insulating sleeve, corrosion-resistant Teflon tubes, and corrosion-resistant insulating Teflon tubes for different corrosive conditions, heat exchanger.
Aidmer78-032 Molded PTFE Tubing
Molded Teflon Tubing: OD: 25mm ~ 250mm; Lenght: 100mm/pc ~ 300mm/pc ; Molded PTFE Pipe is made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing plastics, Molded PTFE has the best corrosion-resistance and dielectricity. Lead insulating sleeve, corrosion-resistant PTFE tubing, and corrosion-resistant insulating Teflon tubing for different corrosive conditions, heat exchanger.
Aidmer78-040 PTFE Teflon
Hose
Extrusion PTFE Hose is made by plunger extrusion of suspension polymerized PTFE resin. Among all the existing plastics, Extrusion PTFE has the best corrosion-resistance and dielectricity. Lead insulating sleeve, corrosion-resistant PTFE Piping, and corrosion-resistant insulating Teflon Hose for different corrosive conditions, heat exchanger.
|
Product
-